- The best of PRODUCTION PRIVEE with the R2R STEALTH COCKPIT.
The kit includes the R2R Stealth Enduro 50mm or 65mm extension and let you choose between 3 bar height: 1.25", 1" and 0.5" (31.8mm, 25.4mm, 12.7mm) and 3 width: 740mm, 780mm or 810mm. The kit also includes our LBS top cap which is a top cap with integrated spacer.
By combining our R2R Stealth stem to our LG handlebar you get a wonderful and efficient cockpit. The laser etched stripes and marks are classy and allows you an easy set up, the double butted bar and a forged + CNC stem will give you a reliable combo allowing you to ride with no second thoughts while maintaining a low weight to stiffness ratio. The R2R Stealth and our LG bars have been developed are made to work together not only from a mechanical stand point but also in terms of design and functionality. CG has been a key in testing the products from the early prototypes to the production. Thanks to CG and Kevin his mechanic, we did a nice and functional artwork with laser etched settings to allow an easy set up after a mechanic session or after bleeding a brake.
2 years of development have been needed to bring you this enduro specific stem. The R2R Stealth stem is now it is forged being machined. This brings a more refined grain material bringing the reliability even more superior to its full CNC predecessor. It is finally shot peened to get a nice mat finish with laser etching stripes and settings, for a nice, functional and lasting artwork.
Design speaking, as the 548 downhill stem, the R2R stem shapes get their inspiration from the mythical Corvette Stingray. Stem body shapes are winks to the C2 and C3 wings and steerer bolts are integrated in shape recalling the rear light bezels of the C2 corvette.
- KEY POINTS:
-Stiffness and geometry specially studied for endure racing. Precise enough for racing, but not to stiff not to be tiring on long endure stages.
-Specially designed for wide bars.
-Contained overall cockpit weight with the best weight to reliability ratio. Ideal for light build but ready to race an EWS or send your favorites lines and jumps.
-Steerer bolts are hidden on the side of the stem to save your knee in case of transmission problem or crash.
-Built in plastic washer in steerer slot to prevent any over torque, perfect to tighten your stem to the right torque without using a torque wrench. Ideal during a race week-end so you don't need to bring all your workshop.
- R2R SPECS:
Length: 50mm and 65mm
Bar bore : 31,8mm
Material: Forged and CNC'd Al Alloy 7075 T6
Weight : 159g
Finish: STEALTH Black
Artwork : Laser etched
Width: 810, 780 or 740mm
Height: LGMH 31,8mm/1.25" LGB 25,4mm/1" LGTB12,7mm /0.5"
Bar bore : 31,8mm
Up sweep: 5º
Back sweep: 8º (LGMH 7º)
Material: Al Alloy 7075 T6 double butted.
Weight : Between 290 gr and 349gr according to model
Finish: Black anodized.
Artwork : Laser etched and transfer sticker.